Large OC Waterbed Repair Kit - Glue and Patch Set

This is a large waterbed repair set.

• LONG LASTING. Creates a secure and durable repair for continued long lasting use
• CONTENTS The kit contains a one fl.oz tube of glue and two patches measuring 10cm by 20cm
• WORKS UNDERWATER The repair patch kit can be used to fix punctures and tears both in and out of water so there is no need to drain your hot tub, spa or inflatable pool.
• EASY PUNCTURE REPAIR: This Vinyl Repair kit provides a simple and easy method of patching holes and punctures, using clear patches that dry clear to ensure your hottub or pool stays looking good.

This kit contains all you need for lasting repairs to your vinyl products such as pools, hot tubs, inflatables, waterbeds and many others. The kit contains a 30ml tube of glue and two 10cm by 20cm vinyl patches. The patch should be cut to size and the corners rounded for all punctures and repairs. The glue is more than enough for the patches. INSTRUCTIONS. 1. Clean all surfaces to be repaired using a vinyl surface cleaner or other gentle alcohol based cleaner. 2 Cut the patch larger than the area to be repaired. Cut the corners round to prevent peeling at a later stage. 3. Practice applying to patch to a flat surface such as a box. When glue is applied to a patch the patch will react and lose firmness - it will "wilt". Try this with one or 2 small patches before attempting the actual repair ( you will need to practice ). 4. Apply the adhesive to the patch. smooth the glue out using the dauber making sure all areas are evenly covered including the edges. 5. Apply the patch to the damaged area, smooth out any air bubbles. If possible apply a flat weight. A full bonded strength will be achieved after 24 hours. If applying underwater then fold the patch in 2 on itself and then unfold onto the underwater repair. Smooth out air and water bubbles, if possible apply a weight and leave for 24 hours. We have tried these kits on a large number of products. If the patch is glued to a proper smooth clean vinyl surface then the patch is almost melted onto the damaged area and is very difficult to get off. If the surface is not clean or for example nylon based then the patch will not have so much hold. .