Superpump Waterbed draining pump


This is a branded Blue Magic Super Pump as sold thousands and thousands of times in the world markets. When moving a waterbed it is vital not to disturb the inner fleece layers. This can only be achieved by thoroughly draining the waterbed so that it is almost empty. If the bed is moved before the bed is properly drained then the fleece layers will move and the bed will be damaged. It is often difficult to drain a mattress because it is not easy to start the waterflow. This little pump will help start the siphon effect through tap operated water pressure. Please take a few minutes to understand the principle of this. You will need a length of hose ( 10 or 15 metres ) and some standard garden hose connectors to attach the items together. Once you have assembled the kit then it will help you to easily fill and drain your waterbeds.

This is a  tap operated draining pump. The middle exit nozzle should be connected to a hose which is properly connected to the waterbed. The top exit should be connected to a tap with good pressure which is as low a level beneath the bed to be drained as possible. First close the lower pump exit valve and start to fill the bed so that the hose is completely full of water. Then open the lower exit on the pump and the water will start to drain. Once the bed is draining reduce the flow of water through the tap. If the bed needs to be filled the same pump can be used to fill it. The ideal tap for this is a garden type tap with a visible thread. The most difficult task with this pump is to attach it to a tap. Basically if you can attach a garden hose then you can attach this. 
Please note that it is wrong ! to drain a waterbed without a draining adaptor for the mattress nozzle - otherwise the fleece inside the mattress can be damaged.

Please see the many other items in our webstore.

Condition New
Weight 0.1kg